Mérőeszközök, szerszámok, tartozékok

For measuring the resistance to earth and the soil resistvity, with automatic selection of the measuring range and checking of sensor and auxiliary earth-electrode resistance.

For earth loop measurement.
Easy handling, high-resolution OLED display.
Automatic calibration, Bluetooth interface incl. software.

Continuity tester for resistance measuring e.g. at air-termination and down conductors and subsequently installed reinforcement rods of buildings. Testers may be used for resistance measuring of earth-termination systems according to DIN 18014 with a test current of 200 mA.

For storing the continuity tester and measuring accessories.Equipment includes:

• 2 coilers with unwinding handle and 50 m blue measuring wire, Part No. 585 320
• 1 measuring wire 0.75 mm², 3 m long, black, with split plug on both sides, Part No. 545 020
• 1 test clamp, clamping range 2-21 mm, Part No. 588 000

Case with shoulder strap for easy transport.Equipment includes:

• 1 coiler with unwinding handle and 25 m red measuring wire, with split plug, Part No. 585 310
• 1 coiler with unwinding handle and 50 m blue measuring wire, with split plug, Part No. 585 320
• 2 auger drills 350 mm long, Part No. 587 460
• 2 black measuring wires 0.75 mm², 3 m long, with split plug on both sides, Part No. 545 010 (connection between earth termination system and earth resistance meter)

– 1 red measuring wire 0.75 mm², 0.5 m long, with split plug on both sides, Part No. 545 010– 1 blue measuring wire 0.75 mm², 0.5 m long, with split plug on both sides, Part No. 545 011 (connection between coiler and auger drill)– 1 test clamp, clamping range 2-21 mm, Part No. 588 000With storage compartment for Metrel MI 3123 or GEOHM C measuring device.

For straightening round conductors of different materials (semi-rigid).

For bending and straightening of conductors.

Universal use for lightning protection system installation. With four wrench sizes.

For wrapping of aboveground and underground connections.
In reels, length 10 m, UV stabilised.

Heat-shrinkable sleeve for coating Rd and Fl conductors, e.g. when leading terminal lugs out of the concrete or earth entries out of the ground.
UV stabilised, customised length.